accessory extension cables PSA-12 power supplies (12 volt) printed in usa 05/01 p/n 67445 PSA-12 models 86.4 mm (3.40") 149.1 mm (5.87") 1.8 m (6.0') 50.8 mm (2.00") w arranty: banner engineering corp. warrants its products to be free from defects for one year. banner engineering corp. will repair or re place, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty peri od. this warranty does not cover damage or liability for the improper application of banner products. this warranty is in lieu of any other warranty either expr essed or implied. features 12v dc power supply delivers up to 3.5 amps to power banner 12v continuous led lights ? choose model with 120v ac north american power cord, or with 220v ac euro power cord ? includes pre-wired 9-pin d-sub connector for direct connection to led lights ? tough abs housing environmental rating iec ip20; nema 1 operating conditions t emperature: 0 to 50? (+32 to 122?) maximum relative humidity: 95% at 40? (non-condensing) models input input cord output output cable used with PSA-12e PSA-12 100-250v ac 50/60 hz 1.1 a max @ 100v ac north america (nema 5-15) 12v dc ?% with voltage regulation of ?% 3.5 a max. 1.8 m (6') t erminated with 9-pin d-sub connector (female pins) continuous led lights cont. europe (schuko cee 7) connections pin 1 = +v pin 2 = dc common pin 3 = dc common pin 4 = +v pin 5 = +v models length configuration db910 ? 3.0 m (10') db906 ? 1.8 m (6') t erminated both ends with 9-pin d-sub connector, for continuous lights (one end male pins and opposite end female pins) db9y ? 1.8 m (6') y cable for powering 2 lights from one supply, for continuous lights ? these models are not stocked and are non-returnable. banner engineering corp., 9714 tenth ave. no., mpls., mn 55441 ?ph: 763.544.3164 ?www.bannerengineering.com ?email: sensors@b annerengineering.com
|
